Dutchclamp UNIFIX IM 12-32

Click to enlarge

Dutchclamp UNIFIX IM 12-32

Dutchclamp UNIFIX IM are suitable for fastening cables with a diameter of 12 mm (0.45 inch) up to 32 mm (1.26 inch). By means of 2 block parts, 4 cables can be fastened along side each other. On the basis of the number of cables to be fastened, you define the number of block parts you need. 2 Block parts for 4 cables, 3 block parts for 8 cables and so on.

If you wish to fasten more cables along side each other, you can couple the block parts by means of the clever dovetail connection. Unifix IM types are, due to the chosen pressure areas, unique in their kind.
The pressure areas, which fully support the cables, are massive and do not have any sharp edges.
Because of this the cables are well fixated without getting damaged and therefore ideal for installations where cables are subject to top short circuits.

The cable blocks are constructed in such a way that they have an exceptionally high mechanical strength of 29.500 Nm. The dimensions of the mounting holes are chosen carefully as well.
These have a diameter of 13,2 mm (0.52 inch). Because of this the threaded rods can be lengthened at any position by means of threaded rod couplers.

Dutchclamp UNIFIX IM type Cable clamps are manufactured from a fibreglass - reinforced Polyamide and are unique in their design, which results a in a longer life span of 50 years. Resistant against humidty, corrosion (ideal to replace stainless steel type cleats), UV radiation, frost, oil, acids, salts, aggressive materials.

The Dutchclamp UNIFIX IM type Cable Clamps absolutely will NOT burn - FLAME RETARDANT and there is no reduction of strength or any signs of degrading withing temp. -40°C and +120°C

See the proof in our little test video below!
 

PRICE IS FOR TWO BLOCKS

CONTACT US FOR POSSIBLE DISCOUNTS ON LARGE QUANTITIES! - +44 (0)1744 762 937

DCblock2
Click to enlarge

DCblock3
Click to enlarge

DCblock4
Click to enlarge

DCblock5
Click to enlarge