UNIFIX IM - 4 X 12mm to 32mm O.D

Dutchclamp Cable Clamps - Dutchclamp Cable Cleats UNIFIX IM - 4 X 12mm to 32mm O.D
Dutchclamp Cable Clamps - Dutchclamp Cable Cleats
Dutchclamp UNIFIX IM are suitable for fastening cables with a diameter of 12 mm (0.45 inch)
up to 32 mm (1.26 inch). By means of 2 block parts, 4 cables can be fastened along
side each other. On the basis of the number of cables to be fastened, you define the
number of block parts you need. 2 Block parts for 4 cables, 3 block parts for 8 cables
and so on. If you wish to fasten more cables along side each other, you can couple the
block parts by means of the clever dovetail connection.
Unifix IM types are, due to the chosen pressure areas, unique in their kind. The pressure
areas, which fully support the cables, are massive and do not have any sharp edges.
Because of this the cables are well fixated without getting damaged and therefore
ideal for installations where cables are subject to top short circuits. The cable blocks
are constructed in such a way that they have an exceptionally high mechanical strength
of 29.500 Nm. The dimensions of the mounting holes are chosen carefully as well.
These have a diameter of 13,2 mm (0.52 inch). Because of this the threaded rods can
be lengthened at any position by means of threaded rod couplers.
Dutchclamp UNIFIX IM type Cable clamps are manufactured from a fibreglass - reinforced Polyamide and are unique in their design, which results a in a longer life span of 50 years. Resistant against humidty, corrosion (ideal to replace stainless steel type cleats), UV radiation, frost, oil, acids, salts, aggressive materials.
The Dutchclamp UNIFIX IM type Cable Clamps absolutely will NOT burn - FLAME RETARDANT and there is no reduction of strength or any signs of degrading withing temp. -40°C and +120°C